|
|
Minidox-M |
|
| The
Minidox - M Decontamination System is a basic chlorine dioxide gas
generation system designed for use in any animal research facility,
pharmaceutical, manufacturing, laboratory, or research setting. It
provides a rapid and highly effective method to decontaminate a target
chamber. The system features a sophisticated sterilant concentration
monitoring system to assure a tightly controlled decontamination process.
The target can be any chamber such as an isolator (sterility test, filling
line, containment…), pass through, processing tank or vessel, clean room,
Lyophilizer, etc. The Minidox Decontamination
System is portable in design and easily connected to various targets.
The process is easy to validate due to the repeatable cycle, tight
process control, and its highly accurate sterilant monitoring system.
Small chambers can be fully decontaminated with a total cycle time of
less than 1.5 hours and rooms can be fully decontaminated with a total cycle
time of less than 3.5 hours.
An optional steam inject module delivers steam to raise relative humidity to within a specified range. |
||
Why use the Minidox - M gas generators?
|
·
short cycle times ·
does not condense out or breakdown during the
process ·
sterilization at ambient temperatures ·
generates a true gas ·
precise concentration monitoring ·
excellent distribution into hard to reach areas ·
quick aeration (can literally be minutes) ·
does not require tight control of dew point
temperatures ·
portable ·
rugged and reliable industrial components · quick connection to chamber |
·
complete cycle automation ·
easy to use touch screen operator interface ·
documented run report ·
quick consumable replacement ·
no manual wiping or neutralization ·
no concern for condensation as with hydrogen
peroxide ·
long life span when compared to ozone ·
non-carcinogenic, non-flammable ·
no liquids in process · no down time between cycles · quality construction |
|
Utility Requirements at Point of Use |
Utility Requirements at Consumable Change Out Station |
|
·
100 - 240 VAC, 5 amp, single phase · 20 psi steam (for optional Steam Injector) |
· 15 cfm, negative pressure exhaust · 100 - 240 VAC, 5 amp, single phase |