To Top


Request a Quote

The TORCH+ is an easy-to-use, powerful disinfection system designed for use in any healthcare, pharmaceutical, manufacturing, laboratory, or research setting. It is used to provide a rapid and highly effective method to disinfect surfaces, components, and common touch points to reduce the transfer of dangerous pathogens.

The TORCH+ contains eight high powered UV-C lamps to provide quick disinfection times. It's low power consumption allows it to plug into any standard wall outlet. The TORCH+ produces an efficient UVC output of 200 μW/cm2 at 8ft (12 mJ/cm2 per minute) to get a calculated 99% reduction of MRSA in 10 seconds. A 99% reduction of spores like C. difficile can be achieved in 5 minutes within a distance of 8 feet. A recent study shows that traditional UV systems such as the TORCH+ provide similar results as expensive Pulsed Xenon Ultraviolet Light Systems. Click here to read the full study. Our UV-C bulbs have been validated to deactivate the SARS-CoV-2 virus. Click here to read more

The TORCH+ is loaded with features to make it simple to use and manage. Disinfection cycles can be controled based on time or accumulated UV dosage using the integrated UV sensor. The Torch+ comes with an iPadTM to use for operation and remote monitoring. Data recording and management is easy and efficient as well, with data stored on the iPadTM at the end of every cycle. Integrated motion sensors provide 360o coverage of the surrounding area to abort the cycle if motion is detected.

Download the TORCH+ Brochure

Download the Torch+ Data Sheet for more features, specs and info on the Torch+

Download the UV-C Disinfection Data Sheet

High UV Output

The TORCH+ outputs UVC light at 200 μw/cm2 (12 mJ/min) at 8 ft to provide rapid disinfection.

Low Power Consumption

The TORCH+ can be plugged into any standard 115 VAC outlet.

Integrated UV Dosage Sensor

The integrated UV sensor logs the total UV dosage for the cycle.

Remote Cycle Monitoring and Control

The TORCH+ comes with an iPadTM which allows you to control and monitor cycles from anywhere.

Integrated Motion Sensors

The TORCH+ has four built-in motion sensors to provide 360o coverage which will abort the UV cycle if any motion is detected

UVC Output
at 4 ft
at 8 ft
at 10 ft
378 µW/cm2
200 µW/cm2
128 µW/cm2
Dimensions 23" W x 68" H x 23" D
(58 cm x 173 cm x 58 cm)
Weight 72 lbs. (33 kg)
Power 110-240 VAC, 6 Amps, 50/60 Hz
Bulb Lifespan 16,000 Hours
TORCH+ Operations Video

Watch the video below to see how the TORCH+ works

Watch the video below to learn about our full line of ultraviolet light products